Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
ECO Window Systems Window Replacement: The Pinecrest Owner’s Guide
ECO Window Systems window replacement in Pinecrest typically runs $340-$780 per opening installed, depending on frame type, glazing package, and whether the original installation used nail-fin or block-frame construction. We stock ECO-compatible sashes, balances, and hardware for same-day replacement on most series, and we measure every opening to the sixteenth before ordering - no “close enough” that leaves you with a gap or a forced fit. Most Pinecrest homeowners discover their ECO window is failing when the sash won’t stay up, the lock bar won’t engage, or they feel air movement around a frame that used to seal tight.
Which ECO Window Systems Models This Applies To
ECO Window Systems manufactures three residential lines we see regularly in Pinecrest: the 3000 Series (single-hung and horizontal roller), the 5000 Series (impact-rated single-hung and casement), and the 7000 Series (thermally broken aluminum for energy-efficient retrofits). The 3000 Series uses a non-impact 7/8-inch insulated glass unit with a snap-in sash balance; the 5000 Series upgrades to laminated impact glass and a heavier-duty constant-force balance rated for the additional weight. The 7000 Series carries a thermal break and requires a different jamb depth - 3¼ inches versus 2⅞ on the 3000 - which means you cannot substitute a 3000 sash into a 7000 frame without compromising the seal.
To identify your series, check the etched mark in the glass corner (ECO logo plus four-digit date and series code) or the label on the balance mechanism inside the jamb. We carry OEM ECO balances and sashes, plus verified aftermarket hardware from Truth and Caldwell that meets the original torque specs. For impact-rated units, we specify OEM glass - the interlayer thickness and frame reinforcement are tested as a system, and substituting non-certified glass voids the Miami-Dade NOA. For non-impact hardware and balances, aftermarket equivalents perform identically at lower cost and carry the same 365-Day Done Right Promise.
Sightline Windows & Doors Pinecrest is an independent service provider - we are not affiliated with ECO Window Systems - and we document every part number on your written quote before work starts.
Signs Your ECO Window Systems Window Replacement Is Failing

- Sash drops or won’t stay open. The constant-force balance has lost tension, usually from corrosion at the pulley or fatigue in the spring coil. In Pinecrest’s salt-air environment, we see this at 8-12 years on coastal-exposed elevations, sooner if the weep holes were painted shut and water sat in the jamb.
- Visible moisture between glass panes. The insulated glass unit (IGU) seal has failed, allowing humid air into the airspace. Once the desiccant saturates, the fogging becomes permanent; the only fix is IGU replacement, not defogging.
- Lock bar won’t engage or requires force. The keep receiver has shifted due to frame expansion, or the cam lock has worn at the contact point. On ECO’s 5000 Series, the multi-point lock hardware is series-specific; a generic replacement won’t align with the striker plates.
- Draft or light leak around the frame perimeter. The weatherstrip has compressed past recovery or the frame-to-wall sealant has cracked. In Pinecrest’s afternoon thunderstorm pattern, this shows first on west-facing walls where thermal cycling is most extreme.
- Cracked or chipped glass with intact laminate. Impact glass can spiderweb while the interlayer holds. The window still functions but the impact rating is compromised; replacement is required to restore the original design pressure rating.
Before
AfterReplacement Cost & What’s Included
| Component | Price Range (Installed) |
|---|---|
| Balance / sash hardware replacement | $180-$290 |
| Insulated glass unit (IGU) replacement | $280-$440 |
| Full sash replacement (non-impact) | $340-$520 |
| Full sash replacement (impact-rated) | $480-$780 |
| Complete frame-out replacement | $680-$1,200+ |
These are Pinecrest-specific ranges based on what we’ve written on measured surveys this year. The spread reflects glazing package (clear versus Low-E versus impact), frame depth, and whether the original installation used integral fins that require siding touch-back. Every quote lists the part number, labor line-item, and any wall-sealant or trim work required - Haven Clause 1 means the measurement and the quote are the same document. The 365-Day Done Right Promise covers the installation and the part; if the balance tension drops or the IGU fogs within a year, we replace it at no charge and document the fix in your photo record.
DIY or Call Us?

What you can safely check: verify the series from the glass etch, confirm the lock operates smoothly without forcing, and clear weep holes with a pipe cleaner so water drains out of the track. What goes wrong fast: removing a sash without supporting the balance can release stored tension suddenly, and impact-rated glass weighs 3-4 pounds per square foot - a dropped sash damages the frame and the floor. ECO’s constant-force balances are calibrated to the exact sash weight; the wrong tension and the window either slams shut or won’t close fully. We carry a truck stock of ECO-compatible balances measured by pound-weight, and we verify the new balance against a scale before installation. Call (786) 442-3200 and we’ll schedule a measured survey - you’ll keep the drawing, and the written price won’t change at the invoice.
FAQs
The non-impact 3000 Series typically sees balance or seal failure at 10-15 years in Pinecrest’s coastal climate; the impact-rated 5000 Series often reaches 15-20 years on the frame but may need glass replacement at 12-15 if the IGU seal degrades. Salt exposure on east-facing walls accelerates hardware corrosion by 20-30 percent. Call (786) 442-3200 for an exact assessment of your specific units - estimates are free.
Hardware, balances, and IGUs can be repaired or replaced independently; the frame itself is only replaced if it’s bent, corroded through, or out of square beyond shimming. We evaluate each opening and note on your written quote whether repair or replacement is the better value. Call (786) 442-3200 to schedule a survey.
A balance or IGU replacement takes 45-90 minutes per opening; a full sash or frame replacement runs 2-4 hours depending on exterior trim and wall-sealant work. We arrive with the part already verified against your measured survey, so the job starts when we start - no return trip for a “close enough” fit. Call (786) 442-3200 to book.
We stock balances, lock hardware, and weatherstrip for the 3000, 5000, and 7000 Series on our service trucks, and we maintain a local inventory of common IGU sizes for Pinecrest. Specialty sizes or discontinued series require 5-10 business days from order to delivery; your quote will state the timeline before you approve it. Call (786) 442-3200 to confirm availability for your model.
Measure twice. Quote once. No surprises at the invoice.
Ready to fix your ECO Window Systems window? Call (786) 442-3200 to schedule your free, measured survey. You’ll receive a written, line-item quote before any work starts, and a documented photo record when the job is done - that’s the Haven Standard we’ve operated under since 2012.
Written by Sonia Raman, Owner, Sightline Windows & Doors Pinecrest at Sightline Windows & Doors Pinecrest, serving Pinecrest and nearby areas.










Before
After
Before
After
Before
After